Linde H 80 D - Page 109

Service Training
Page 4.2
Section 51
09.04
ITEM NO. DESCRIPTION
1.1 Screw coupling M 14 x 1.5
1.3 Adapter nipple
1.5 Screw coupling M 8 x 1
1.7 a Banjo bolt M 14 x 1.5 with plug and M 8 x 1 bore
1.7 b Banjo bolt M 14 x 1.5 with M 8 x 1 bore
1.12 Low pressure gauge 0 - 40 bar
1.13 High pressure gauge 0 - 600 bar
1.17 Banjo bolt M 18 x 1.5 with plug
1.18 Banjo bolt M 18 x 1.5 with M 14 x 1.5 bore
1.19 Banjo bolt M 18 x 1.5 with M 14 x 1.5 bore
1.24 Cover plate 50 x 38
1.31 Round connector
1.32 Banjo bolt with shut-off valve
ADAPTER NO. CONSISTING OF:
I Adapter nipple 1.3
Screw coupling 1.1
II Banjo bolt 1.7 a
Screw coupling 1.5
III Banjo bolt 1.7 b
Screw coupling 1.5
IV Banjo bolt 1.18
Screw coupling 1.1
V Banjo bolt 1.19
Screw coupling 1.1