Page 8
Section 4.5
Service Training
4.5.3 MEDIUM WHEEL SPEED
CONDITIONS
- Jack up and securely block the truck so that the wheels can turn freely.
- Accelerator pedals and engine speed control correctly adjusted.
- Engine runs at 2250 - 2300 rpm with the accelerator pedals fully depressed.
CHECK
- Start the engine, release the brake and fully depress the right-hand accelerator pedal.
- In this position measure the speed of the left and right wheel and calculate the average of both speeds.
- Perform the same measurement with the left accelerator pedal depressed.
- Specified speed: 155 - 165 rpm
09.96
To Next Page
Loading...
