Service Training
Page 4.2
Section 5
WHEEL DRIVES
Two wheel drives bolted to frame
Each unit consists of:
1 variable-displacement hydraulic motor HMV 105 S
Definition of type designation: H = High pressure
M = Motor
V = Variable displacement
105 = Max. displacement in cc/rev.
S = Swashplate
Number of pistons: 9
Piston diameter: 21 mm
Swashplate angle/displacement: max. 20.8 °/105 cc
min. 8 °/40 cc
Start/end of delivery: 7 bar/10 bar
1 oil-pressure operated disc brake
- mounted on extended engine shaft
- fully encapsulated, running in oil
- required only as parking brake and emergency brake
1 planetary hub reduction gearbox i = 17.45
To Next Page
Loading...
