■
Marker function
The measurement data position (position number) can be stored for up to 5
locations. You can jump directly to the position (mark).
Touch [ ] at the bottom of the data display screen to select
“Set to marker”,
and touch markers 0 to 4 to register the position number of the rst data on
the data display screen.
Touch
“Move to marker” and select the marker to which you want to jump to
move there.
When you save the data, the registered marker will be saved together.
Markers without saving data will be erased when the power is turned o, the
measurement is started, or the data le is loaded.
-37-
To Next Page
Loading...
Need help?
General