-59-
Chapter 9 PC Link Function
9.1 Installation of the USB Driver
You can control the line monitor or update the firmware remotely
from a PC. Before use this function you need to install the USB driver
to the PC.
■
How to install the USB driver
1) Start WITHOUT connecting it with a PC.
2) Set the attached CD-ROM to the PC. Or download the USB driver for
LE-110SA series (lewusbd_v1.1.x.x or later) from LINEEYE website
and decompress it to any folder of the PC.
3) Run the “setup.exe” le.
4) Click “Yes” at the “User account control” window.
5) Click “OK” at the “LINEEYE
driver package installer”
window.
6) Click “Next” at the install wizard.
7) Click “Install” at “Windows security” window.
8) Click “Finish” at the nish window of the install wizard.
To Next Page
Loading...