-24-
3.3 Communication Speed
Communication speed has to be set according to the speed of target
devices.
Press [Menu] → [Configuration]
and set the speed.
■
Speed
Touch […] and select a preset
speed. If appropriate speed
cannot be found in the preset
speed, it is able to type any
speed using [0]-[9] keys.
Touch [ ] to apply the setting. On the right side of the set speed, a
tolerance percentage will be displayed.
If the actual speed is much dierent (more than 3% of tolerance rate), the line
monitor may not be able to monitor properly.
To Next Page
Loading...
Need help?
General