LineEye LE Series User Manual

-62-
By [ ] (or at Remote – Remote
setting – Connection), confirm that
the connection method is USB and
the serial number is that of the line
monitor.
By [ ] (or at Measurement – Analyzer setting), set the monitor condition of
the line monitor.
By [ ] (or at Remote – Connection), link the line monitor and the PC.
By [ ] (or at Measurement – Run
measurement), it starts measurement.
The measured data will be displayed
on the PC in real time and the data
will be saved to PC.
By [ ] (or at Measurement – Stop measurement), it stops the measurement.
It also can stop measurement when the specic trigger condition is met using
trigger function. The measured data will be saved in the folder specied at
Remote – Remote setting – Remote monitor.

When you using the light edition, the measurement stops after 10 minutes passed
aftere starting measurement.

LineEye LE Series Specifications

General

Brand	LineEye
Model	LE Series
Category	Measuring Instruments
Language	English