LineEye LE Series User Manual

-70-
Select USB at Connection
Method and select the serial
number at Serial number. Then
click [Next].
5) Click [Select] and select the
firmware file. Then click
[Next].
6) It starts transfer of the
rmware by clicking [Start].
7)
Then the nish window appears to inform that it nished the update.
8) Click [Close] to close the software.
9) Turn o the power of line monitor and then turn on the power to run
with the new rmware.

Please refer to le8rm.txt included in the attached CD-ROM for the detail.
Attention:
Do NOT turn o the power of line monitor while rmware update. If do
so, the line monitor will be broken and not be able to run. It will need to
be repaired at LINEEY factory.

LineEye LE Series Specifications

General

Brand	LineEye
Model	LE Series
Category	Measuring Instruments
Language	English