Loadrite L2150 - Page 34

8-34
Loadrite L2150 User Manual
Group Options
Format
Description
Totals
The printout is grouped and summarized by product total.
[Data Field 1]
The printout is grouped and summarized by Data Field 1.
[Data Field 2]
The printout is grouped and summarized by Data Field 2.
[Data Field 3]
The printout is grouped and summarized by Data Field 3.
Press or to scroll up or down, then press .
If Totals was selected, the Port Options will display. Otherwise the Match Options will display.
Match Options
Format
Description
All
All values are used on the printout.
One
Only one of the grouped values is reported on. For example, if the printout is grouped by
Customer, a report can be generated on one Customer.
Press or to scroll up or down, then press .
If Match All was selected, the Load Options will display. If Match One was selected, the specific value must now be selected
before the Load Options are displayed.
Load Options
This option determines whether or not the printout will display the number of loads per product. The options are On or Off.
Press or to scroll up or down, then press .
The Port Options will display.
Port Options
Format
Description
Printer
Prints to the Loadrite printer.
EDP
Captures data to a laptop or Data Module.
Press or to scroll up or down, then press .
When the port has been selected, the report will print.
8.2.7. Set Number of Copies
 > Copy
This function sets the number of dockets to be printed at each clear event.
8.2.8. Print Data List
 > Data List
This function prints a list of all values from the configured Data Fields (Data 1, Data 2, etc). This function is normally only used
to confirm that the values are correct after the list has been updated.