16A-16
STARTING - LOAD
Starter motor
K7M, and 710
16A
Remove:
-bracket (3) mounting the inlet manifold to the cylin-
der block,
-the starter motor leads.
Remove:
- the starter motor mounting bolts (4),
- the starter.
REFITTING
Tighten to torque the starter mounting bolts (4.4
daNm).
Proceed in the reverse order to removal.
107486
109220
3
109215
WARNING
Connect the battery, starting with the positive ter-
minal; carry out the necessary programming (see
80A, Battery, Battery: Remove and refit.
44
To Next Page
Loading...