10A-11
ENGINE AND LOWER ENGINE ASSEMBLY
Engine/gearbox assembly
L90, and K7J, and 710
10A
Disconnect:
-the petrol vapour absorber bleeding solenoid valve
connector,
-the brake servo pipe from the inlet manifold,
-petrol vapour rebreather pipe (20) from the inlet
manifold.
-the fuel supply pipe (21) from the injection rail.
Disconnect cooling hoses (22).
Remove cooling hoses (23) from their support.
107357
IMPORTANT
Be careful of petrol splashing out when discon-
necting the fuel supply union.
Wear gloves during the operation.
21
20
108565
109493
2222
22
23
To Next Page
Loading...