Lombardini CHD series - Manufacturer and Motor Identification Data; Approval data

- 14 - Workshop Manual LDW CHD _ cod. 1.5302.345 - 6° ed_rev. 05
2
C
A
F
D
E
B
2 3
4
7
6
5
1
Theidenticationplateshowninthegurecanbefounddirectly
on the engine.
It contains the following information:
A) Manufacturer’s identity
B) Engine type
C) Engine serial number
D) Maximum operating speed
E) Number of the customer version (form K)
F) Approval data
Approval data
The approval reference directives EC are on the engine plate.
Plate for EPA regulations placed on the recoil starter or the rocker-
arm cap.
It contains the following information:
1) Current year
2) Engine displacement
3) Rated power, measured in kW
4) EPA family ID
5) Injection timing
6) Injection opening preassure
7) Valve clearance
MANUFACTURER AND MOTOR IDENTIFICATION DATA
Technical information