Lombardini CHD series - Temperature Sensors and Switches; Coolant high temperature lamp switch; Thermistor for electric thermometer; Thermistor for preheating water temperature-Thermal contact for water temperature indicator light

- 82 - Workshop Manual LDW CHD _ cod. 1.5302.345 - 6° ed_rev. 05
C°311÷701
C°58>
V42÷21
W3
03- 99141÷1799
02- 5448÷5406
0- 3333÷7542
02+ 1451÷9611
04+ 948÷956
06+ 745÷534
08+ 504÷723
001+ 533÷572
021+ 692÷641
53- 38935÷60837
03- 92293÷14925
51- 60081÷52802
0 5907÷9298
03+ 8171÷0402
06+ 125÷985
09+ 981÷502
021+ 77÷58
203
202
200 201
9
Coolant high temperature lamp switch
Characteristics:
Single-pole circuit, normally open
Supply voltage ...........................6÷24V
Absorbed power ........................3W
Circuit closing temperature ........107÷113°C
 Whenrettingtightento25Nm.
Thermal contact T2 features
Circuit
Unipolar
Closing temperature
Contact opening temperature
Supply voltage
Maximum thermal contact power
Thermal contact T1 features
Resistance Ω
Temperature °C
Thermistor features
Resistance Ω
Temperature °C
The max. torque is 30 Nm.
Thermistor for preheating water temperature – Thermal contact
for water temperature indicator light
Thermistor for electric thermometer
Electric system