5.3
5.3
5.3
5.3 LUBRICATION
LUBRICATION
LUBRICATION
LUBRICATION CHART
CHART
CHART
CHART
Grease the lubricant
at
various sliding bearing or rolling bearing sections, such as:
1. Driving shaft with cross head.
2. All pin sets
at
both ends of the tanks.
3. Hinge pin sets of front and rear frame; sub-frame swing the pin sets.
4. Each pin sets of the working device
Inject grease into the above mentioned sections with pressure. Please note that inject
grease in time depending on the working status.
To Next Page
Loading...