1.8.8
1.8.8
1.8.8
1.8.8 MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE UNDER
UNDER
UNDER
UNDER MACHINE
MACHINE
MACHINE
MACHINE
Before maintenance or repair, stop the machine on a solid flat ground, lower the working
device to the ground and fix the tires with wedges;
Working under the poorly supported machine is prohibited. If the tires are off the ground
and the machine is only supported
by
the working device, maintenance under the
machine is very dangerous.
1.8.9
1.8.9
1.8.9
1.8.9 MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE WITH
WITH
WITH
WITH THE
THE
THE
THE FRAME
FRAME
FRAME
FRAME SUPPORTED
SUPPORTED
SUPPORTED
SUPPORTED UP
UP
UP
UP
When the frames are maintained with the working device lifted,
it
is necessary to lock up
the front and rear frames with the frame fixing rods. Set the joystick to the “ neutral ”
position, lock up joystick with locking equipment, and then support the worki ng device
with supporting rods.
1.8.10
1.8.10
1.8.10
1.8.10 MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE ON
ON
ON
ON THE
THE
THE
THE TOP
TOP
TOP
TOP OF
OF
OF
OF THE
THE
THE
THE MACHINE
MACHINE
MACHINE
MACHINE
When conducting maintenance on the top of the machine, make sure your standing point
is clean and no barrier, as well as comply with the following items for the prevention of
falling:
Put the demounted components into a safe place
and make sure they wound not fall. Encircle the
demounted components with a fence and put up
a sign of “ no entry ” to avoid prohibitive person
entering this area.
Before lifting, wedge the wheel from the opposite
side. After lifting, place a block under machine
To Next Page
Loading...