Lonking CDM853 - 3.7 PILOT JOYSTICK

To Next Page

To Previous Page

3.6

3.6 FLEXIBLE

FLEXIBLE

FLEXIBLE SHAFT

SHAFT

SHAFT CONTROLLED

CONTROLLED

CONTROLLED SPEED-SHIFT

SPEED-SHIFT

SPEED-SHIFT HANDLE

HANDLE

3.7

3.7 PILOT

PILOT

PILOT JOYSTICK

JOYSTICK

The accelerator pedal is arranged on the right

front floor of Cab. Not depressing the accelerator

pedal, the engine will stay at the idle status.

Depressing the accelerator pedal will increase

the fuel supply to diesel engine thus the output

power of dies el engine.

The instrument desk adjusting mechanism is on

the right side of the instrument desk. Generally

speaking, the instrument desk tilts backward and

forms an included angle of 75 ° with the pedestal.

The adjusting range is 5 ° forward tilt and 20 °

backward tilt on this basis.

The flexible shaft controlled speed-shift handle is

arranged below the steering wheel.

Forward/ Reverse;

The flexible shaft controlled speed-shift handle

can be turned to 2 forward gears (I, II), 1 reverse

gears (I) and 1 neutral gear.

Pilot joystick is mounted on the right side of seat

and used to control the working system.

The left and right movements of joystick are used

to control the moving direction of the bucket. The

Reserved