Lonking CDM853 - 2.1 MAINPERFORMANCEPARAMETERSANDSPECIFICATION

60
2.1
2.1
2.1
2.1 MAIN
MAIN
MAIN
MAIN PERFORMANCE
PERFORMANCE
PERFORMANCE
PERFORMANCE PARAMETERS
PARAMETERS
PARAMETERS
PARAMETERS AND
AND
AND
AND SPECIFICATION
SPECIFICATION
SPECIFICATION
SPECIFICATION
ITEM
ITEM
ITEM
ITEM
CDM853
Performance
Bucket capacity (m
3
)
3.0
Rated payload (Kg)
5000
Lifting time(s)
≤ 6.0
Falling time (s)
≤ 4.0
Total hydraulic cycle time (s)
≤ 11
Maximum speeds
(km/h)
Forward I (km/h)
11.5
Reverse I (km/h)
16
Forward II (km/h)
36
Reverse II (km/h)
-
Forward III (km/h)
-
Reverse III (km/h)
-
Forward IV (km/h)
-
Traction force (kN)
155 ± 3
Maximum breakout force( kN )
≥ 1 55 ± 5
Maximum Grade ability ( ゜ )
28
Minimum turning
radius
Measured at centerline
of outside tire (mm)
5885mm
Measured at outer side
of bucket (mm)
6805mm
Dimensions(mm)
Loader length (with
bucket flat on ground)
(mm)
7760 ± 100mm
Loader width (from wheel
outside) (mm)
2835 ± 50mm
Bucket width (mm)
3000 ± 30mm
Loader height (from cab
top)(mm)
3380 ± 30mm
Wheel base (mm)
2930 ± 30mm
Wheel track (mm)
2240 ± 10mm
Minimum ground
clearance (from
articulating point)
400 ± 20mm
Max. lifting height (mm)
3078 ± 50mm
Unloading distance at
max. lifting (mm)
1190 ± 50mm
Loader weight (Kg)
15800 ± 300kg
Driver ’ s seat
In the cabin