EasyManua.ls Logo

Lonking CDM853 - 1.6.10 PRECATUTIONFORSTART-UPWITHBOOSTERCABLE

Lonking CDM853
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
1.6.10
1.6.10
1.6.10
1.6.10 PRECATUTION
PRECATUTION
PRECATUTION
PRECATUTION FOR
FOR
FOR
FOR START-UP
START-UP
START-UP
START-UP WITH
WITH
WITH
WITH BOOSTER
BOOSTER
BOOSTER
BOOSTER CABLE
CABLE
CABLE
CABLE
If the connection method of booster cable is wrong,
it
may cause fire; therefore,
it
is
necessary to abide
by
the following methods:
It
requires two operators to start the machine (one of them sitting down the operator s
seat)
It
is not allowable the two machines contact each other when starting another machine.
When connecting the booster cable, turn off the two starter switches of normal machine
and failed machine.
When installing the booster cable, first connect the positive (+) pole cable, while
demounting the booster cable, first disconnect negative (-) pole cable (ground side).
The final earth connection means connect the earth cable to the engine of failed machine,
but
it
will produce sparks, therefore, make
it
keep away from the battery.
When demounting the booster cable, do not let the clips of booster cable touch each other
me time call the emergency center for help.
Please shut down the engine before operating the
battery. Avoid metal objects (such as tools)
unexpected contact with the battery, because it may
cause short-circuit between the positive (+) and
negative (-) terminal.
When installing battery, first connect positive (+)
terminal, while demounting battery, first disconnect
negative (-) terminal (ground side).
When amounting or demounting battery, first identify
which is positive (+) terminal and which is negative (- )
terminal, and tighten the nuts firmly.
Clean the top surface of battery with wet cloth
instead of gasoline, solvent, or any other organic
solvent and cleanser.
Tighten the top cover of the battery.
If the electrolyte of battery has frozen, it is dangerous
to charge the battery or start the engine with other
power supply, for is may cause battery fire.
Unfreeze the electrolyte and check whether there is
leakage before charging the battery or starting the
engine with other power supply.
Demount battery from the machine before charge it.

Table of Contents