PyroTec™ PRO Hardw are User’s Manual, V1.2 17
RT-MN024-1.2 02/21
3 Operating Company
The operating company must ensure that the PyroTec™ PRO and the safety features func-
tion properly and that all the personnel in contact with the instrument are adequately
trained.
• Method and process validation.
• Defining the processes in compliance with the Standard Operating Procedures.
• Ensuring that installation and operational qualifications (IQ OQs) have been com-
pleted.
• Ensuring that all personnel in contact with the PyroTec™ PRO are adequately trained.
• Ensuring the availability of appropriate protective clothing and equipment.
• Ensuring the maintenance and safe operation of the PyroTec™ PRO.
•
Requiring adherence to laboratory safety regulations and directives.
3.1 User Qualification
The laboratory personnel must be fully qualified and trained to operate the PyroTec™
PRO. The work described in this User’s Manual must only be performed by authorized per-
sonnel with the qualifications prescribed below.
Laboratory personnel must:
• Have suitable technical training,
• Be familiar with the laboratory safety regulations and directives,
• Be familiar with the instructions for the safety elements of the instrument,
• Use protective clothing and equipment,
• Be familiar with and adhere to good laboratory practices,
• Have read and understood the instructions in the User’s Manual.
Lonza recommends that the operator attend an operator-training course including routine
use and end-user maintenance training. Please ensure training requirements are stated
clearly on a completed pre-installation checklist.
3.1.1 Operator
The operator (lab technician) works for the operating company.
Required Skills
• Command of local languages
• Command of English is preferable
The operator has application software access rights allowing him/her to run methods and
To Next Page
Loading...