PyroTec™ PRO Hardw are User’s Manual, V1.2 25
RT-MN024-1.2 02/21
4.1.2 Product Identification and Labelling
Details for product identification can be read from the type plate, which is located on the
back of the instrument near the power inlet.
On the type plate (A) you find the following information:
• Identification data
o Model
o REF: Ordering information (material number)/revision level
o Production date
o SN: Serial number
• Technical data
o Supply voltage (Volts), frequency (Hertz)
o P: Power consumption (VA)
o Fuse: Required fuse protection (A)
• Manufacturer’s name and address
• Conformity marking
More details of product identification, such as specific data of the instrument according to
the order configuration, can be taken from the Tecan Maintenance and Service Logbook.
To Next Page
Loading...
