Lonza PyroTec PRO - Preface; Manufacturer Information; Product Usage Guidelines; CE Conformity

Return to TOC
PyroTec™ PRO Hardw are User’s Manual, V1.2 2
RT-MN024-1.2 02/21
Go to TOC
0 Preface
For Your
Safety
Before performing any work on or with PyroTec™ PRO, first read this User’s Manual care-
fully, in particular chapter 2 “Safety.”
0.1 Manufacturer
Address of
Manufacturer
Lonza Walkersville
8830 Biggs Ford Road
Walkersville, MD 29414
USA
0.2 Use of the Product
0.2.1 Intended Use
Intended Use
PyroTec™ PRO is an open automation platform product for general laboratory use. It is in-
tended for routine laboratory tasks, such as general-purpose pipetting, general-purpose
liquid handling, and robotic processes.
0.2.2 Improper Use
Improper Use
PyroTec™ PRO must not be used with options or components that are not approved by
Lonza.
WARNING
The use of non-approved options may impair the safety concept of the PyroTec™ PRO.
This means that the safety and compliance to national and international standards, as re-
quired for UL/CSA certification, by EC directives, etc. cannot be ensured any more.
0.3 CE Conformity
Declaration of
Conformity
PyroTec™ PRO is designed and built in compliance with the basic safety and health re-
quirements of applicable EC Directives. With the declaration of conformity, the manufac-
turer declares conformity with the provisions of the Directives.
CE Label
The CE label is affixed to the PyroTec™ PRO.
0.4 CSA Certification
PyroTec™ PRO is tested and certified by the Canadian Standards Association (CSA).
CSA Marking
The CSA marking is affixed to the PyroTec™ PRO.