Start-up
- 44 - 10.13
45 5153 5047 49 52
565759 5860
61
Abb. 17: Control console BasicPlus
13 Start-up
13.1 Control console BasicPlus
45 Symbol wire feed
lights up in the 7-segment display 47 if
the wire feed is displayed in m/min or
as correction value in %.
47
7-Segment display wire feed / material
thickness
depending on the mode, wire feed,
material thickness, welding step or (al-
ternating) secondary parameter code
and value are displayed.
49 Symbol 4-stroke
lights up if 4-stroke mode is set.
50 Symbol 2-stroke
lights up if 2-stroke mode is set.
51 Symbol Spot welding
lights up if spot welding mode is set.
52 Symbol Interval
lights up if interval mode is set.
53 Symbol material thickness
lights up if the 7-segment display 47
displays the material thickness in mm.
56 Main switch
for turning the welding machine ON
and OFF.
To Next Page
Loading...
