Declaration of conformity
- 57 -10.13
20 Service
Lorch Schweißtechnik GmbH
Im Anwänder 24 - 26
D-71549 Auenwald
Germany
Phone +49 (0)7191 503-0
Fax +49 (0)7191 503-199
21 Declaration of conformity
We herewith declare that this product was
manufactured in conformance with the fol-
lowing standards or ofcial documents
EN 60974-1:2012, EN 60974-2:2013, EN
60974-10:2007 CL.A in conformance with
the guidelines 2014/35/EU, 2014/30/EU,
2011/65/EU.
2016
Wolfgang Grüb
Director
Lorch Schweißtechnik GmbH
19 Disposal
Only for EU countries.
Do not dispose of electric tools to-
gether with household waste ma-
terial!
In accordance with European Council Direc-
tive 2012/19/EC on electrical and electronic
equipment waste and its implementation in
accordance with national law, electric tools
that have reached the end of their service
life must be collected separately and re-
turned to an environmentally compatible re-
cycling facility.
18.2 torch holder
Abb. 20: Torch holder assembly left
Item no: 570.8052.0
Abb. 21: Torch holder assembly right
Item no: 570.8050.0
To Next Page
Loading...
