129
Appendix O: Remote Viewing (Mac)
Configuring PTZ settings
The system supports PTZ (Pan, Tilt, Zoom cameras. PTZ cameras are sold separately).
• For details on connecting PTZ cameras to your system, see “Appendix H: Connecting a PTZ
C
amera” on page 112.
To control the PTZ settings on the DVR:
1 Se
lect the channel that the PTZ camera connects to.
2 Use the PTZ control panel to control the pan, tilt, zoom, focus and iris control of the PTZ
camera.
To assign a camera pre-set:
1 Adjus
t the camera to the desired pre-set location using the direction keys.
2 In the Pa
n&Tilt Pos drop-down menu, enter a pre-set number.
3 Cl
ick the Set ( ) button.
4 Cl
ick Save ( ) to save your settings.
To open a pre-set, enter the desired Pan&Tilt Pos number. Click the Go T
o button ( ).
Direction keys: Click to pan and
tilt the camera
Speed Slider:
Increase or decrease the pan and tilt speed
Click the + and - symbols to
adjust the camera Zoom, Focus
and Iris settings
Camera Pre-set controls
Cruise
Clear settings
Load button
To Next Page
Loading...
Need help?
General
