77
Remote Viewing
Configuring Mobile Device Settings
You can change the user name, password and port number required to log in to the system
using a mobile device (i.e. iPhone, Blackberry etc.)
You must port forward the Mobile service port to your
router before you can access your
DVR using a mobile device.
To configure mobile device
settings:
1 Cl
ick Remote Setting>Device>Mobile.
2 Co
nfigure the following:
• User
Name: Enter the desired user name
• Password: Enter the desired password
• Service Port: Shows the current mobile port (default port 1025).
NOTE: Y
ou cannot change the mobile port remotely through the internet or local area
network. You can only change the port locally through the DVR.
3 Cl
ick Apply to save your settings.
To Next Page
Loading...
Need help?
General
