91
L-View for Mac
English
5.6.2 VIDEO TAB (CONFIGURE GENERAL VIDEO SETTINGS)
The Video tab allows you to configure general video settings, such as color and
brightness settings.
To configure general video settings:
1. Right-click the camera in Camera List and click Video settings. Then
, select the
Video tab.
2. Under Video Col
or, select Colored or Black & White.
3. Under Sharpnes
s, select the sharpness of the image between 10 (highest) and 1
(lowest).
4. Under Plac
e, select Outdoor if the area with the camera is brightly lit. Select Indoor
if you notice strip lines in the image or if the picture is too dark on the Outdoor video
setting. Select Indoor + Sunlight if the picture is too bright on the Indoor setting.
• If you select Indoor or Indoor + Sunlight, select 60Hz or 50Hz under Light F
requency
to adjust the camera for the frequency of your indoor lighting.
5. Under Video Flip, sel
ect Flip to flip the camera image vertically and horizontally or
select Normal for normal orientation.
6. Under Brightness, sel
ect the brightness of the image between 10 (highest) and
1 (lowest).
7. Under Lo
w Light Sensitivity, set the camera’s sensitivity in low light environments
between Very High (highest), High, and Normal (lowest).
Select Brightness
Select Low Light
Sensitivity
Enable/disable time
stamps
Enable/disable built-in
microphone
Select Colored or
Black & White
Select Sharpness
Select Lighting
Select Indoor
Lighting Frequency
Flip camera image
To Next Page
Loading...
