Lorex LNC216 Series - Connecting Camera to iPad

9
Getting Started
English
9. Tap the name of the camera in the Camera List to connect to the camera. Lorex Ping
connects to the camera.
10.If this is the first time connecting to the c
amera, you will be prompted to create your
own password. Tap OK.
11.Under New password, enter a new password for the camera and repeat the
password under Confirm password. Tap OK.
Tap the camera again to connect to the camera.
Lorex Ping streams live video from your
camera.
2.2 CONNECTING TO YOUR CAMERA ON IPAD®
Follow the steps below to connect to your camera on an iPad® using WiFi or Ethernet.
Tap the name of the
camera to connect
Tap OK
Enter a new password, confirm
your password, and then tap OK