187
Configuring Camera Settings using a Web Browser
English
9.6.3 DATE/TIME
Configure the camera date and time. The camera syncs with an Internet NTP time server
to automatically provide the correct time, once you have configured your time zone and
daylight savings time settings.
To set the camera date and time:
1. Under Time Zone, sel
ect your time zone.
2. Select Enabl
e under Daylight Savings Time if your region observes Daylight Savings
Time. Configure the Start Time and End Time for Daylight Savings Time if needed.
3. Click Sa
ve & Apply to apply settings to the camera.
9.6.4 UPGRADE
Upgrade the camera firmware. When firmware upgrades are released, they will be
available as a free download from www.lorextechnology.com.
NOTE: Your computer must be on the same network as the camera to upgrade the
firmwa
re.
To upgrade the camera firmware:
1. Download the free firmware upgrade from w
ww.lorextechnology.com. Unzip the
contents of the firmware .zip file to a folder.
Select Enable
Select Time Zone
It is highly recommended to set the date and time when first setting
up your system.
Inaccurate time stamps may render your footage unusable for
court evidence.
To Next Page
Loading...
