Lorex LNC216 Series - Editing Camera Mobile Streaming Settings; Editing Camera Video Settings

149
Android™ App
English
8.4.3 EDITING CAMERA MOBILE STREAMING SETTINGS
Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Str
eam Settings.
3. Under Bandwidth, sel
ect the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under Auto, t
ap to select ON to have the camera automatically select the resolution
and frame rate based on available bandwidth. Or, select OFF to manually select the
resolution and frame rate. If you select OFF, configure the following:
• Under Resolution, sel
ect the resolution that will be used when connecting to the
camera using a smart phone or tablet: 320x240, 480x360, 640x400, or 1024x768.
• Under Frame rate, select the frame rate that will be used when connecting to the
camera using a smart phone or tablet between 30fps (highest) and 1fps (lowest).
5. Under Micr
ophone, tap to select OFF to turn off audio streaming to your mobile
device or tap to select ON to turn on audio streaming to your mobile device.
6. Tap Updat
e to save your settings.
8.4.4 EDITING CAMERA VIDEO SETTINGS
1. In Camera List, tap next to the camera you would like to edit.
Select Mobile Bandwidth
Enable/disable auto resolution and frame
rate adjustement
Select Resolution
Enable/disable audio streaming to Android™
device
Select Frame rate