31
Getting Started
English
8. Under New Password, enter a password that will be used for the camera. Under
Confirm Password, enter the password again. Click OK.
9. Double-click the camera again under Camera List to connect. For detailed
ins
tructions on using L-View, see “L-View 104116 for PC” on page 42.
2.4.3 PC WIFI SETUP
The camera must be connected to your router using an Ethernet cable before you can set
it up to use WiFi.
1. Install L-View on a PC in your local network (must be connected to the same router
a
s the camera) and connect to the camera.
2. Right-click on the camera ID in the Auto Search area and click W
eb Configure.
3. Enter the camera admin user name and password. By default, the admin user name
is admi
n and the admin password field is left blank. Click Log in. The Web Configure
interface opens in your default web browser.
NOTE: Your camera admin user name and password differs from the password used to
connect to your camera to view video.
4. Click on Netw
ork and then WiFi Security.
Enter a new password
Confirm new password
Click OK
Right-click the camera under Auto
Search and click Web Configure
To Next Page
Loading...
