121
iPad® App
English
7.1.1 USING 2-WAY AUDIO (INTERCOM)
1. While viewing, touch to activate 2-way-audio (intercom) using the phone
microphone.
2. Tap again to deactivate 2-way-audio.
7.1.2 TAKING SNAPSHOTS
• While viewing, tap to take a snapshot from the camera. You can view snapshots
using the Camera app or save photos to your computer by connecting your iPad®
to your computer using a USB cable.
NOTE: There is no Camera app on 1st generation iPads. To view your snapshots, you
must connect the iPad to your computer using a USB cable.
7.1.3 RECORDING VIDEO TO IPAD
You can manually record video from your camera directly to your iPad’s built in memory.
To record video to your iPad’s memory:
1. While viewing, tap to start recording.
2. Tap again to stop recording. To view the recorded video, see below.
7.2 PLAYING BACK VIDEO RECORDED TO IPAD®
After using the record button to record video to your iPad®, you can playback video on
iPad®.
To playback video recorded to iPad®:
1. Tap the Playback button ( ) then tap iP
ad.
2. Select the camera you would like to playback video fr
om. A list of days with recorded
video appears.
3. Tap a day to see recordings from that day. Tap a recording to start playback.
To Next Page
Loading...
