62
L-View 116 for PC
3.8.1 QUALITY TAB (CONFIGURING RESOLUTION, FRAME RATE,
AND BANDWIDTH)
The Quality tab allows you to configure image quality settings such as the camera
resolution, frame rate, and bandwidth settings.
To configure image quality settings:
1. Under Bandwidth, sel
ect the upload speed of your Internet connection. If your
Internet connection is faster than 1.5Mbps, select 1.5Mbps.
2. Check Sel
ect the best resolution and frame rate automatically to have the camera
automatically adjust the resolution and frame rate based on bandwidth. Or, un-check
it to manually configure the resolution and frame rate. If you are manually
configuring the resolution and frame rate, configure the following:
• Resolution: M
anually select either 320x240 (QVGA), 640x480 (VGA), 1024x768, or
1280x800 resolution. Higher resolution will give you a better, more detailed picture,
but requires more bandwidth. Lower resolution allows the camera to maintain a
higher frame rate when available bandwidth is low.
• Frame rate: Manually select the frame rate between 30fps (highest) and 1fps (lowest).
30fps is real time video, meaning that movement in the image will appear smooth,
with no choppiness.
3. Under Pr
eference, select your quality preference when bandwidth increases or
decreases:
Select Internet connection speed
Check to automatically adjust
resolution and frame rate
based on bandwidth
Select Resolution
Select Frame Rate
Select how image quality will be
affected when bandwidth is low
To Next Page
Loading...
