155
Android™ App
English
2. Tap Alarm Notification.
3. Under Te
mperature, select ON to enable temperature push notifications.
4. Under T
emperature unit, select °C or °F.
5. Under Higher bound, sel
ect the high temperature value. You will receive a
notification if the temperature near the camera goes above this value.
6. Under Lo
wer bound, select the low temperature value. You will receive a notification
if the temperature near the camera goes above this value.
7. Tap Updat
e to save your settings.
8.4.9 EDITING CAMERA WIRED NETWORK SETTINGS
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camer
a Settings.
Enable temperature notifications
Select Celsius or Fahrenheit
Select high temperature for notifications
Select low temperature for notifications
To Next Page
Loading...
