Lorex LNC216 Series - Recording to PC Hard Drive

36
Getting Started
2.5.2 CONNECTING TO YOUR CAMERA ON A MAC
NOTE: For Mac system requirements, see “System Requirements” on page 42.
1. Install the L-View software from the CD or download it from
www
.lorextechnology.com.
2. Extract the installer file and double-click it to run.
3. Click and drag the L-View icon to Applications t
o install.
Connecting to your Camera on the Local Network (Mac)
NOTE: Your computer must be on the same network as the camera to perform the steps
below.
1. Open L-View ( ) from your Applications list. L-View scans for cameras on your
local network.
2. Double-click the camera ID.
Click and drag L-View
to Applications
Double-click
the camera ID