Lorex LNC216 Series - L-Play: Playing Recorded Video on PC

55
L-View 116 for PC
English
3.5.1 CONFIGURING A CONTINUOUS RECORDING OR PLAY ONLY
SCHEDULE
ATTENTION: Your computer must be on, and L-View must be running to enable
scheduled recording to your computer hard drive. If your computer is off or on Sleep or
Hibernate mode, scheduled recording to your computer hard drive will not work.
1. Click to open the Scheduling menu.
2. Under Windo
w #, select the screen you would like the schedule to run on. The
arrangement of screens in L-View is shown above.
3. Double-click a camera from the Camera Lis
t to select it for this schedule. The
camera connection information automatically populates. Under Password, Enter the
camera password if it is not saved in L-View.
4. Select Enabl
e to enable the schedule or Disable to disable it.
Select Enable to enable schedule
Select screen schedule will run on
Double-click
the camera
Select
Continuous
recording or
Play only
Configure
the Start and
End date and
time
Select what to
do if screen is
occupied
when
schedule
starts
Click Save