Lorex LNC216 Series - Fixed IP Access

68
L-View 116 for PC
3.9.3 FIXED IP ACCESS
The Fixed IP Access menu is for advanced users only. It must be used if you have
assigned your camera a fixed IP address on your router.
To configure your camera to use a fixed IP address:
1. Check Connect to the camer
a with a fixed IP address to enable cameras to use fixed
IP addresses.
2. Click OK t
o save changes.
3. In the camera list, right-click the camera y
ou would like to configure and select
Assign IP Address.
4. Enter the camera’s internal IP address and click OK.
Check to enable Fixed IP
addresses for cameras
Assign IP address