127
iPad® App
English
4. Under PIR, select ON to enable Push Alarm Notifications when motion is detected
using the PIR motion sensor or OFF to disable.
5. Under Sound, sel
ect ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Updat
e to save your settings.
7.4.4 CONFIGURING TEMPERATURE PUSH NOTIFICATIONS AND
TEMPERATURE UNITS (FAHRENHEIT OR CELSIUS)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the
temperature unit that will be used by the system.
To configure temperature push notifications:
1. In Camera List, tap next to the camera.
2. Tap Alarm notification.
Example of temperature
push notification
Select ON to enable temperature
notifications
Select temperature units
Select the high temperature value that
will trigger notifications
Select the low temperature value that
will trigger notifications
To Next Page
Loading...
