39
Getting Started
English
NOTE: To connect to multiple cameras, click to select a display area. The area becomes
highlighted. Then, double-click the camera to open it in the selected area.
2.5.3 MAC WIFI SETUP
The camera must be connected to your router using an Ethernet cable before you can set
it up to use WiFi.
1. Install L-View on a Mac in your local network (mus
t be connected to the same router
as the camera) and connect to the camera.
2. Right-click on the camera ID in the Auto Search area and click W
eb Configure.
3. Enter the camera admin user name and password. By default, the admin user name
is admi
n and the admin password field is left blank. Click Log in. The Web Configure
interface opens in your default web browser.
NOTE: Your camera admin user name and password differs from the password used to
connect to your camera to view video.
4. Click on Netw
ork and then WiFi Security.
Click to select a
display area
Then, double-click
a camera to open it
Right-click the camera under Auto
Search and click Web Configure
To Next Page
Loading...
