136
iPad® App
• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may also select both PIR and Motion to receive alarms from both motion
triggers.
• Schedul
e: Send email alarms based on the settings configured in the Scheduling
menu.
7. Enter up to 3 email addresses under Recipient1~3 that will r
eceive email alarms.
8. Tap Updat
e to save your changes.
NOTE: If you want to use a custom SMTP server to send Email messages, click SMTP
Settings, enter your SMTP server information, and tap OK.
7.4.12 ENABLING SPEAKER ALARMS
Configure the siren. The siren can be set up to go off when the camera detects motion.
This is helpful if you want to scare off intruders.
To configure speaker alarms:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camer
a Settings.
3. Tap Schedul
e then Speaker Alarm.
4. Under Speak
er Alarm Trigger, check the triggers that will cause speaker alarms:
Select speaker alarm triggers
Select number of times speaker
alarm will repeat
Test speaker alarm
To Next Page
Loading...
