Lorex LNC216 Series - Connecting to Your Camera on PC

28
Getting Started
2.4.2 CONNECTING TO YOUR CAMERA ON PC
NOTE: For PC system requirements, see “System Requirements” on page 42.
1. Install the L-View software from the CD or download it from
www
.lorextechnology.com.
2. Double-click the L-View icon to run L-View.
Connecting to your camera over the local area network (LAN):
1. When L-View opens, it scans the local network for connected cameras. Connected
c
ameras are shown under Auto Search.
2. Double-click the camera under Auto Search or click and drag the camera to a
desir
ed screen on the display grid to connect to the camera.
3. Enter the camera password. If this is the fir
st time connecting to the camera, the
password is lorex. Click OK.
Or, double-click
camera under
Auto Search
Click and drag camera
to a display screen