Lorex LNC216 Series - Editing Camera Wifi Network Settings

109
iPhone® App
English
2. Tap Camera Settings.
3. Tap Netw
ork then Wired Network.
4. Select DHCP (r
ecommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Updat
e to save your settings.
6.4.10 EDITING CAMERA WIFI NETWORK SETTINGS
Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camer
a Settings.
3. Tap Netw
ork then WiFi Network.
4. Slide WiFi to ON t
o enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
Select DHCP or Static
If Static, configure IP
address information