107
iPhone® App
English
4. Tap Control to return to the Control menu.
5. Under Mot
ion Sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
Tap Control to return to the Control menu.
NOTE: This setting does not affect the PIR motion detector.
6. Tap Video Settings when finished making changes, then t
ap Update to save your
settings.
6.4.8 CONFIGURING NIGHT MODE SETTINGS
Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Video Settings. Then t
ap Night Mode Control.
3. Select one of the following:
• Aut
o: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Schedule: Camera will switch between day mode and night mode at a scheduled
times each day. If using this option, tap under Schedule time of night mode, use the
Select Night Mode
control type
To Next Page
Loading...
