Lorex LNC216 Series - Temperature Push Notifications and Units

138
iPad® App
4. Tap Schedule then SD-Card.
5. Under Rec
ording, select ON to enable microSD recording or OFF to disable.
6. Check one of the following recording options:
• Al
ways Recording: Camera will record continuously at all times.
• Schedule Recording: Camera will record according to settings set in the recording
schedule.
NOTE: To enable Motion detection recording using iPad®, you must use Schedule
recording. Then, create a schedule in the Scheduling menu with Motion trigger, PIR
trigger, or both Motion trigger and P
IR trigger selected.
7. Check C
ircular recording to set the camera to overwrite the oldest recordings when
the microSD card is full or select Stop recording to set the camera to stop recording
when the microSD card is full.
8. Tap Updat
e to save your settings.
7.4.14 CONFIGURING THE CAMERA RECORDING AND ALARM
SCHEDULE
Configure schedules for recording and alarms. Schedules can be configured separately
for alarms and recording. You can configure up to 12 schedules.
Enable microSD recording
Select Always recording or
Schedule recording
Select if you want the camera to
overwrite (Circular recording) or stop
recording when the microSD card is full