53
L-View 116 for PC
English
3.4.1 ENABLING MOTION TRIGGERED RECORDING
L-View can automatically record the camera to your computer hard drive when motion
is detected. This is useful if you don’t want to miss any events that occur, but want to
avoid recording and using up hard drive space when nothing is happening.
To enable motion triggered recording:
1. Right-click on the camera display area and click Motion Rec
ording.
• The recording icon above the camera will turn green ( ) to show that motion
r
ecording is enabled. It will turn yellow ( ) when motion recording is active.
2. To disable motion triggered recording, right-click and click Motion Rec
ording again.
NOTE: T
o view recordings, click to open L-Play. See “L-Play: Playing Recorded
Video on your PC” on page 76.
3.5 CONFIGURING A VIDEO PLAYING/RECORDING
SCHEDULE
You can configure a schedule for automatically displaying a camera on a specific display
screen or recording a camera to your computer hard drive.
You can configure the following schedule types:
• Play
only: Display a camera on the selected display screen from a start date to an
end date.
• Continuous recording: Display a camera on the selected display screen and record
continuously from a start date to an end date.
Right-click and then click
Motion Recording to enable/
disable motion recording
To Next Page
Loading...
