100
iPhone® App
2. For certain menus, you will need to enter the camera admin user name and
password before you may change settings. By default, the admin user name is admin
and the password is left blank.
6.4.1 EDITING CAMERA CONNECTION SETTINGS
You can edit your camera connection information. This is useful if you change the
password of the camera or if you want to save the admin user name and password, so
you don’t have to enter it to make settings changes.
To edit camera connection settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Change the Name and
Password as needed.
3. Under Dynamic ic
on update, select ON to have the camera icon automatically update
every time you connect to the camera, or select OFF to keep the icon as is.
4. Under Sav
e admin password, select ON to have Lorex Ping save the admin user
name and password the next time you enter it, or OFF to require the admin user
name and password whenever settings changes are made.
5. Tap Back t
o save changes and return to camera list.
Edit Camera Name
Edit Password
Enable/disable automatic icon updates
Enable/disable saving admin user name and
password next time entered
To Next Page
Loading...
