186
Configuring Camera Settings using a Web Browser
9.6.2 LED CONTROL
Configure the behavior of the camera status LED’s. This is useful if you want the camera
to be harder to spot at night.
To configure the LED’s:
1. Select one of the following:
• Normal LED display: LED’
s will function as normal. For details on LED functions,
see “Camera Overview” on page 1.
• Turn off LED display always: LED’s are turned off at all times.
• Turn off LED display after network connected: LED’s turn on when the camera is
powered on and turn off once a network connection is made.
2. Click Sa
ve & Apply to apply settings to the camera.
To Next Page
Loading...
