Lorex LNC216 Series - Page 46

30
Getting Started
2. Click + next to Camera List.
3. Under Name, ent
er a camera name of your choice.
4. Under CamID, ent
er the Cam ID number printed on the camera.
5. Under Pa
ssword, enter the camera password. If this is the first time connecting to
the camera, the password is lorex. Click OK.
6. Double-click the camera or drag the camera to a display screen to connect to the
ca
mera.
7. If you have connected to this camera before, L-View c
onnects to the camera. If this is
the first time connecting to the camera, L-View will prompt you to create your own
password for the camera. Click OK.
Click +
Enter a camera name
Enter the camera ID
Enter the camera Password
(default: lorex)
Click OK