188
Configuring Camera Settings using a Web Browser
2. In L-View, right-click on the camera in Auto Search and click Web Configure.
3. Type the camera admin user name (default: admi
n) and password (default: left
blank) and click Ok to log into the camera.
4. Click Admi
n then click Upgrade.
5. Select Upgr
ade from local file.
6. Click Br
owse, locate the firmware upgrade file, and then click Open.
7. Click Upgr
ade. Wait for the firmware upgrade to complete. Do not disconnect the
power or network cable during the firmware upgrade. The camera will reboot once
firmware upgrade is complete.
Right-click the camera under Auto
Search and click Web Configure
Click Browse and
select firmware file
Select Upgrade from
local file
Click Upgrade
To Next Page
Loading...
