Lorex LNC216 Series - Page 129

113
iPhone® App
English
3. Tap Schedule then Speaker Alarm.
4. Under Speak
er Alarm Trigger, check the triggers that will cause speaker alarms:
• Motion: Use Video motion det
ection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger speaker alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may
also select both PIR and Motion to receive alarms from both motion
triggers.
• Schedul
e: Create speaker alarms based on the settings set in the Scheduling menu.
• Disable: Disable speaker alarms.
5. Under Alarm Loop Times, sel
ect the number of times you would like the speaker
alarm to repeat when alarms occur.
6. Tap Alarm T
est to sound a test alarm.
7. Tap Updat
e to save your settings.
Select speaker alarm triggers
Test speaker alarm
Select number of times speaker alarm will
repeat