16
Getting Started
7. Under ID, press the QR code button ( ) and line up the QR code printed on the
back of the camera using the camera on the iP
ad. The CamID will automatically be
entered.
• OR: Manuall
y enter the CamID printed on the camera.
NOTE: QR code setup is not compatible with the 1s
t generation iPad®. If you have a 1st
generation iPad®, manually enter the CamID printed on the camera into ID.
Press to scan the QR
code printed on the back
of the camera, OR
manually enter the
CamID printed on the
camera
Line up the QR code to the
middle using the iPad® camera
To Next Page
Loading...
